EM 385 40‑Hour Safety Training Practice Exam

These questions are part of the practice quiz. Start practicing

• What areas should be properly illuminated for maintaining a safe working environment?
• What should toilet facilities provide?
• What is a necessary requirement for trenches made in stable rock?
• Which of the following is NOT part of crane and derrick selection and placement procedures?
• What is the role of the employer when employees use their own PPE?
• What aspect is critical for maintaining safety while using explosive-actuated tools?
• How many designated persons must be on duty above ground whenever personnel are underground?
• What is the significance of having guards equipped on power-driven circular saws?
• What color should emergency stop buttons be to ensure they are easily identifiable?
• When a bus, truck, or truck-trailer combination is parked during the daytime, what must be displayed?
• What type of equipment control devices are recommended for handling loads in potentially hazardous situations?
• Vehicle speed on curves should be limited so that vehicles can stop within what distance?
• For excavations or trenches less than what depth are both an AHA and an Excavation/Trenching plan required?
• Temporary project fencing may be deemed unnecessary under what circumstance?
• Is it true that air monitoring must be continuous during entry into a confined space?
• Which of the following is included in a critical lift plan?
• What is required to be submitted before the erection of any structural masonry?
• Which of the following is NOT a required feature for mechanized equipment and machinery?
• What must a Competent Person (CP) do regarding Lift Hoisting Equipment (LHE) prior to each shift?
• What is an essential feature of temporary traffic signals?
• A multiple lift is considered critical when it entails:
• Who should plan and design precast concrete operations?
• Which condition is critical for effective communication during operations?
• What must signal systems be protected against?
• What does the APP plan address?
• Who must also be protected when exposed to the same atmosphere as welders and cutters?
• Which of the following statements about heat stress in the workplace is correct?
• Tree climbers should carry tools in which of the following?
• Is swimming allowed for personnel on floating plant and marine vessels?
• Employees should always assume that equipment is energized. What is the truth value of this statement?
• What feature is crucial in commercial cargo vehicles or trucks for safety in hazardous areas?
• What is the responsibility of the Contracting Officer regarding an abbreviated APP?
• True or False: All employees must be protected from cave-in hazards when entering or exiting the area protected by shields.
• When working on roofs, how should access points be connected to the work area?
• Can open containers be used for drinking water?
• What must be properly identified and documented for a work area to be designated as a non-hard hat area?
• How should metal decking be laid during installation?
• What type of device shall be used to secure loads when hoisting?
• The PPE needed for employees performing hot work is based on what specific document?
• Blasting machines must be operated, maintained, tested, and inspected as prescribed by which entity?
• Trailers used as field offices must be anchored for what purpose?
• What is the purpose of a Masonry Bracing Plan?
• What is the minimum illumination required for means of egress measured at the floor?
• In what condition should welding and cutting equipment be maintained?
• How many turns can quick closing valves on fuel gas cylinders be opened?
• Complex diving projects involving multiple work tasks require what type of plans?
• What is the minimum experience required for a SSHO on high hazard projects?
• What method is recommended to control loads handled by hoisting equipment where movement may be hazardous?
• Which of the following statements about emergency stopping devices on conveyor systems is correct?
• Is it true that employees working outside of their normal area must be informed of disease endemics after work begins?
• Which is a sign that indicates a space may be a confined space?
• Which system must be in compliance with local and national safety standards?
• What type of equipment is essential for confined space entry?
• Which statement is true regarding workers engaged in rigging?
• During excavation operations, when should cave-in protection measures be in place?
• What should a competent person do regarding excavation inspections?
• Which of the following drills is NOT included in the floating plant drills?
• What is a requirement for drinking water facilities?
• What type of plan is required for workers at heights using fall protection equipment?
• Should undesignated means of access be used during demolition operations?
• HAZWOPER 40-Hour Training Course must cover which of the following topics?
• What is the minimum OSHA training requirement for SSHO(s)?
• What should be established prior to entering a confined space?
• How far apart should the spacing of rungs be on portable ladders?
• Is it advisable to leave debris beneath the climber during operations?
• Is it permissible for employees to walk on top plates, joists, rafters, trusses, or beams?
• When using hook-on or attachable ladders on scaffolds taller than how many feet are rest platforms required?
• How frequently should training for confined space entry be conducted?
• Which of the following indicates a need for inspection of synthetic rope slings?
• How much weight should hole covers be capable of supporting?
• Under what condition may materials be stored within 6 feet of a roof edge?
• What is a required safety feature for radial arm power saws?
• True or False: Smoking is allowed in gassy operations.
• Which of the following is a requirement for all portable, power-driven circular saws?
• What is a requirement for performing dives with longer than 120 minutes of in-water decompression?
• In hot environments, which guideline is not applicable to prevent heat-related injuries?
• What is the maximum amount of waste and debris that can be stored on the floor related to?
• What must be supplied in all underground work areas?
• For testing the PRCS atmosphere, which of the following should be measured?
• When there is exposure to poisonous snakes or lizards, which of the following should be required of employees?
• What condition must welding cables meet for safe usage?
• Personal Protective Equipment is a control measure that is used only after a hazard evaluation identifies hazards associated with a particular job. Is this statement true or false?
• How often must employees working alone check in with their supervisor?
• Can dry chemical extinguishing agents of different compositions be safely mixed together?
• What must officers and crew possess while on duty?
• What key component is required in every Demolition/Renovation Plan?
• What is a key element in critical lift planning involving personnel?
• When placing a boiler in service, what is required of the operator?
• What must be posted in areas of a vessel or ship that could be considered a potential confined space?
• Which of the following is a requirement for scaffold tags by contractors?
• For workers under what weight must a specially designed PFAS harness and lanyard be utilized?
• When must a fall protection system be used when working over or near water?
• What is the purpose of having a time-delay warning system on conveyor systems?
• During confined space operations, which role is critical for ensuring safety?
• What must be accounted for in the rescue plan for excavations?
• What should food service facilities ensure according to safety standards?
• According to safety protocols, should conveyor systems be constructed according to the manufacturer's recommendations?
• What should employees do if they encounter hazardous materials?
• Which guideline is crucial when providing personal flotation devices?
• What is required for outlets dispensing non-potable water?
• Is it true that drinking water must be provided at all CONUS fixed facilities?
• What must be done to the walls or floor of a fire-damaged structure before demolition?
• Which of the following is NOT a requirement for equipment used in confined space entry?
• What is required before conducting blasting operations?
• In what situation is it safe for personnel to ride in loaders?
• What action must a operator take with regard to safety and licensing while working on marine vessels?
• What should be done if fire hose connections are not compatible with local firefighting equipment?
• When eyes or body may be exposed to hazardous agents, what is a requirement for emergency facilities?
• Which of the following loadings must be considered in the design and construction of temporary structures?
• How often should a competent person inspect a protective system?
• For medical emergencies at large projects, which of the following is essential?
• Do portable ladders used as means of access to ascend and descend to a work location require fall protection?
• How often should Automatic-Inflatable Personal Flotation Devices be inspected?
• How often should work areas be inspected for adequate housekeeping?
• What must employees performing welding, cutting, and heating work have to ensure safety?
• How many employees on each shift should be qualified to administer first aid if a medical facility is inaccessible within five minutes?
• What kind of fall protection is required when working at great heights with fall protection equipment?
• Which is a critical safety measure for preventing accidents with power tools in the workplace?
• What is the maximum height for handrails from the upper surface to the surface of the tread?
• When hole covers are in place, they must support the weight of whom?
• Medical facilities and personnel treating injured employees must be informed about what?
• What is included in an excavation plan for trenches less than 5 feet?
• Which of the following indicates that a project has a high number of personnel present?
• Critical lifts are defined as lifts that involve which of the following?
• Which type of analysis is crucial for selecting diver entry points?
• What is NOT a requirement for employees working in excavation areas?
• What must be done to ensure the safe use of synthetic rope slings?
• Projects using, storing, or handling hazardous substances must comply with which CFR standards?
• What is the maximum temperature that compressed gas cylinders should not exceed?
• Which of the following is NOT a condition that temporary structures must meet?
• Which individuals are allowed to act as signal persons?
• When should a Site Specific Fall Protection and Prevention Plan be updated?
• What is a requirement for a worker to be considered a Qualified Rigger?
• What is a requirement for fire extinguishers in terms of accessibility?
• Which is a critical step before entering a confined space?
• What type of water should be provided in fixed facilities?
• Under what conditions can welding and cutting occur without mechanical ventilation?
• Is it safe for personnel to ride in the buckets of loaders in operation?
• Is roadway lighting required to comply with IESNA RP-10 standards?
• What is the maximum allowed excavation depth below the bottom of shield or support systems in trench excavations?
• Is it permissible to conduct blasting operations near overhead power lines before notifying the owners?
• Where are safety lashings or suitable double action locking devices not required?
• Which information is necessary to be included on a training certificate?
• The procedures and practices for protecting workers from heat and cold stress must comply with which requirements?
• What type of activities require a hot work permit?
• The SSHO must have the authority and is responsible for which of the following actions?
• What is a key feature of toilet facilities as per safety guidelines?
• What must all conveyor systems be equipped with as a time-delay warning system?
• What is the minimum number of anchor rods or anchor belts required for columns to ensure stability?
• What determines how many operators must attend a boiler being placed in service?
• Which safety protocol is essential for complex dive operations involving multiple locations?
• For projects with more than 300 people, what should be established?
• For an excavation or trenching plan, what additional requirement concerns piping activities?
• What should be remembered when working with hot substances?
• What must be provided to prevent the accumulation of hazardous flammable vapors?
• When cracks exceed what multiple of the width of the board, a scaffold plank may not be used?
• How often should signs warning of construction hazards be posted along fencing?
• What is required for commercial cargo vehicles or trucks when operating in potentially hazardous conditions?
• What should storage and construction sites be kept free from?
• What is required for stationary machinery and equipment before being operated?
• Which method is considered the highest priority for eliminating fall hazards?
• What is the required maximum slope for excavations less than 20' in depth?
• When must signs, tags, and labels be visible?
• Who has the authority to train and certify a qualified operator for explosive-actuated tools?
• When employees provide their own safety equipment or PPE, who is responsible for assuring its adequacy?
• Which of the following is a general requirement for erection stability?
• Which of the following is not a requirement for using Automatic-Inflatable Personal Flotation Devices?
• What is a major cause of fatalities in confined space incidents?
• What additional document must be prepared for each separate diving operation along with the dive operations plan?
• What must be checked for compatibility when using sheaves in rigging?
• Do USCG approved PFDs need to be worn by those on deck exposed to severe weather?
• What is an essential feature of an effective excavation safety plan?
• For dives with an in-water decompression time greater than 120 minutes, what must be used?
• What is required of personnel responding to workplace injuries?
• What safety feature should be used for pneumatic tools at connections?
• What must be included in the pre-lift checklist for a critical lift plan?
• How frequently must floating plant drills be conducted?
• To ensure safety, oxyfuel gas welding and cutting equipment should be listed by which organization?
• Before stacking, how should reusable lumber be prepared?
• What should be conducted anytime cleanup operations are performed?
• Why should buildup of extra materials on a conveyor belt be prevented?
• What must be used to protect any chute opening where debris is dumped?
• Which of the following is NOT a required component of Safety and Health training documentation?
• What is the maximum distance for using manual hand signals between the operator and signal person?
• When must materials and debris that fall into a safety net be removed?
• Which of the following statements is true regarding the role of the SSHO in relation to site safety?
• In addition to oxygen, which gases should be tested in the PRCS atmosphere?
• In addition to guardrails, what must be used as a fall protection measure?
• Which of the following is a potential hazard in trenching and excavation work?
• What is the main goal of using proper ventilation while handling flammable liquids?
• Should the buildup of extra material along the conveyor belt be allowed?
• What requirements must barricades, warning signs, and other signaling devices meet?
• Diving submittal documents must be independently reviewed by how many entities?
• Under what condition must an excavation be inspected?
• What is the primary purpose of the lighting near roadways?
• Which of the following statements about floating plant safety is TRUE?
• Who must provide training for anyone involved in scaffold work?
• What is the maximum and minimum step across distance when setting up a ladder from the nearest edge of equipment or structure?
• How often must wire ropes in use on equipment be inspected by a Qualified Person?
• What must sheaves be compatible with when used in rigging?
• Should employees work in excavation areas that have accumulated water?
• What is a common hazard associated with confined spaces?
• Which type of protective feature must be implemented at a roof edge for safe material storage?
• What is the purpose of air monitoring in confined spaces?
• Personnel performing blasting activities must be in what condition?
• Are boats that are less than 26 feet in length required to have perimeter protection?
• Commercial cargo vehicles or trucks are required to use a backup alarm at all times. What is the validity of this statement?
• What must all wood used for residential construction comply with?
• What must guard all floor, roof openings, or holes into which a person can accidentally walk or fall through?
• What should the rescue plan include for workers using fall protection?
• What is the required condition for fire extinguishers according to safety standards?
• Who specifies the load limits that must not be exceeded for boom and basket usage?
• True or False: A fully equipped first aid station and emergency transportation must be provided at each underground construction project.
• What is the primary purpose of the HAZWOPER training course?
• What is one of the responsibilities concerning safety nets on job sites?
• What must the plans for precast concrete operations include?
• What is required for a testing organization to be accredited to certify operators?
• What is the first control measure recommended to abate fall hazards?
• What must be present on the muzzle of a power-driven nailer and stapler to prevent accidental fastener ejection?
• When selecting staging areas for divers, which factors must be considered?
• In terms of safety signs, what is crucial to warn of construction hazards?
• What is the best type of ANSI Z308.1 first aid container recommended for mobile settings?
• What type of commands must personnel performing blasting be able to give or understand?
• What is included in the provision for open fluorescent fixtures?
• What color should the international warning device be that is secured to the hoist line at a distance of 8-10 ft above the rigging?
• What must be ensured for standby divers during diving operations?
• Which component is critical for workers weighing less than 130 lbs. when falling?
• What should operators do if an air monitoring device indicates unsafe conditions?
• Where should lighting be positioned near roadways and public transportation areas to ensure safety?
• What is the maximum weight allowed for a bundle of joist bridging?
• Which of the following statements about metal decking is correct?
• What should be the status of lighting in hazardous areas?
• In the context of confined space training, what is a primary safety consideration?
• Which of the following is NOT included in personal fall protection equipment?
• Before felling begins, workers should consider which of the following factors?
• The ERT must, at minimum, respond in which manner to hazardous substance releases?
• Which of the following are examples of credentialed professionals for tree maintenance?
• Is it acceptable to operate stationary machinery without securing it first?
• What should respiratory protection programs address?
• When should a leaking cylinder be labeled as "DEFECTIVE"?
• Are cafeterias or mess halls required to comply with state and local regulations?
• What is the minimum total height for vertical sides in an excavation less than 20' deep?
• What must be documented in writing for Safety and Health training?
• Is it true or false that all conveyor systems must be equipped with an emergency stopping device?
• What must be true about employees close to welding operations?
• Under what conditions must the APP address heat stress?